How to Clean a Window Air Conditioner Styrofoam?

Home Inspiration

Everyone would love central air conditioning, but that’s not always an option. Within certain limits, buying a window air conditioner can provide cool, fresh air to enter your space. But there are things to keep in mind with these units.

The Styrofoam supplied with the device, which is intended to block the flow of air to the outside, can get dirty or becomes a victim to the mold. The quickest way to clean it is to turn off the device, squeeze out the Styrofoam, and use a chemical cleaner to get the job done. It is easy to say though it can be a bit more complicated than that.

How to Clean a Window Air Conditioner Styrofoam

Here in this article, you’ll find some ways to clean the air conditioner.

Turn Off And Take Out Air Conditioner

The first thing to do is turn off the air conditioner, then remove it from the electric supply socket and take it out from the wall. Safety is pre-eminent when it comes to electronics and it is no different for a window air conditioner because these units run on high voltage. This is to ensure that the unit does not turn on unexpectedly or that there is no potential electric shock if any of the cleaners you use to get on the internal components.

Check If The Styrofoam Is Dirty

Look carefully if there is mold on the Styrofoam inside your window air conditioner, it is probably because the Styrofoam is dirty and there are raindrops or moisture providing humidity. The mold grows in a dark and humid space. The exterior of the window air conditioner is outside in the elements. Over time, dirt will enter the machine and adhere to the Styrofoam. Later the nutrients in the dirt will combine with the moisture. The darkness within the air conditioner and the humid environment makes it perfect for mold growthThat’s all how mold develops but it is not easy to clean mold. You need some special instructions to clean mold because it can be harmful to your health. So it is recommended to call ac repair and service professionals to come and have an inspection.

Clean Mold From Inside The Grill

Air conditioning units differ in the way they are assembled, so consult your owner’s manual to determine how to identify and disassemble the outside cabinet or grill so that you can access the interior. Before you begin, gather your tools and supplies, then put on a dust mask, safety glasses, and gloves. Now inspect if there are little traces of mold then use these things to clean it: Commercial AC coil cleaner, Garden hose, Dish soap, Bleach, Large plastic bucket, Scrubbing sponge. Watch a video if you do not know how to start cleaning otherwise the best option is to call an expert.

Cleaning The Grill And Filter

Remove the filter located on the front grill of the air conditioner. Some of these filters are disposable, if they are too dirty, put a new one. Call a professional to determine if your filter needs to be changed. If your filter is washable, like most window filters, wash it properly and use it again. Put the filter in your sink and spray it with laundry detergent. Fill the washbasin with enough warm water to cover the filter. Let the filter absorb water for fifteen to twenty minutes. Then use the scrub brush to clean both sides of the filter. Rinse the filter with clean water and hang it to dry.

Cleaning The Metal

Now return to your window air conditioner and unscrew the metal cover behind the front grill and lift it. Use the vacuum cleaner and accessories to clean as much dirt and debris as possible inside the unit. Clean up any visible mold growth. In your bucket, mix half a cup of bleach solution, one tablespoon of mild dish soap, and 3 gallons of hot water. Be very careful not to inhale the bleach, which does not come in contact with the skin, clothing, or eyes. It is corrosive and can harm badly. Use long gloves before using the bleach.

Take a cloth, brush, or sponge, dip into the solution, and scrub the moldy areas of your air conditioner well. Also, clean the front grill of the air conditioner if it has mold. Let the solution sit on these surfaces for about 10 minutes, then rinse with water and a damp cloth.

Thoroughly Clean The Styrofoam

Most of the time, the Styrofoam will only have a layer of dust and dirt. This is relatively easy to clean. All you need is a damp cloth and some kind of cleaning spray and it should remove dust and dirt. Mold is a serious problem and requires more than cleaning. If there is too much mold, then do not take a chance and ask for help from an air condition repair company.

Dip The Styrofoam In Water Mixture

This step is meant for deep cleaning or if you haven’t cleaned the Styrofoam in a while. Find a resilient cleaner or even an industrial cleaner and create a mixture with water in a container. Follow the manufacturer’s instructions if in doubt. Allow the Styrofoam to soak in long enough to remove any dirt that covers it. You may need to do this once or twice depending on how dirty the Styrofoam is. When you are comfortable with the cleanliness level, be sure to pat it dry and let it sit dry.

Put The Styrofoam Back In Air Condition

When you are comfortable with cleaning the Styrofoam, you can replace it between the window and the unit. Make sure it is securely tightened between the air conditioner and the window frame. Any space will allow air to escape, creating excess humidity in some cases and will make your air conditioner work harder at the very least.

If you think the mold is still not cleaned properly and you are unable to clean it then seek the help of professional air conditioner repair in Miami. Hire them and they will do the tough job for you. Remember mold is dangerous for health, so get it removed as soon as possible.

Author bio: Rick Anderson is a professional Content writer & Content Marketer at Citylocal Pro. Based in Florida, is an author and blogger with experience in encounter composing on various topics including but not limited to Home, Air Conditioner Repair, Decor, Technology, Food, Marketing/Advertising, Travel, Lifestyle, etc.