How to Fix A Leaking Roof from The Inside?

By admin | Guides and Tips

All of a sudden, you start noticing water stains on the ceiling, after it has rained or snowed; you see water trickling down the sides of the wall till it starts forming small puddles of water on the floor. Then due to the constant activity in the home, this becomes messy in no time. Now that you have noticed all these, here is how to fix a leaking roof from the inside.

In situations like this, you need to act fast, or you could be changing the whole roof, especially when its time for the rains; but you would not want to incur the unnecessary expenses that would come with this.  Have you been in a position where all of a sudden, your roof starts leaking? Has there ever been that time where there is no professional insight to call, and you cannot wait any longer for the leak to be fixed? Or you want to learn how to fix your leaking roof yourself?  

What do you need to prepare?

If you need an immediate temporary solution, as this is one very important topic, you need to get started as soon as possible. Before you start, here is the list of tools you are more likely to need.

  • Rubber gloves
  • A 5-gallon bucket
  • Roof patch
  • Flashlight

Fixing Your Roof Step By Step

The methods to be highlighted here are temporary at best; the permanent solution to a leaking roof is a professional repair or a replacement. The roof is solely designed to shield you from the harsh weather conditions. These elements can subsequently result in wear and tear, which can destroy the roof. Subsequently, you would surely need the services of a professional to have an overall look. Well, let us get on with this, shall we?

Step 1: Enter the Attic

  • For you to be able to fix the leaking roof, you have to look for the attic of your house and enter into it; most homes have one. If the covering is one which has a barrier, plastic or not between the attic insulation and the wall.
  • Move the insulation to a side and then move to clean any water left. To do this, you only have to put a small piece of wood across the joists of the ceiling and then place a bucket on it appropriately to drain the water.
  • In case your roof is waterlogged already, you might need to puncture the roof, place a bucket under and allow water to drip freely into the bucket. You might have to repair the ceiling afterward.

Step 2: Locating the Leak

  • Locating the actual source of a leak is one of the critical things to do in roof repairing. The area of the hole must be correctly determined; else, you would have to repeat these steps.
  • To do this, you should follow the position at which it enters the roof. Although at times, it can be a little distance from the spot where it is dripping into the ceiling. You can also trace the water path along a beam. Do note that at times, water can follow the base of the roof deck.
  • Once you have addressed the damage coming into the house, you can get up into the attic around the affected ceiling. Do take care not to step on anywhere without supports; then, with the use of a flashlight, you can locate the affected area and trace it back to where it is entering your roof.
  • Sometimes, looking for a small leak can be very tricky. If you cannot see the flow marks of water, and it is only a tiny stain, all you have to do is to look under the roof for single nails which escaped the support beneath the roof covering.
  • Sometimes moisture escapes into the attic from the rooms below, and when this happens, it condenses on cold nails. This shiner can easily be spotted when you climb into your attic on a chilly evening.

The nails will look white because moisture is settling on them, and when the attic heats later the day, the frost on the pin disappears. A simple solution, in this instance, is to clip the nail with pliers simply.

Step 3: Make a Patch

  • The next step is to make a sort of transitory leak using a roofing patch, tar, and a piece of plywood. You should apply the roofing tar to the hole or base of the roof deck by making use of a utility knife.
  • Firmly attach the plywood or the piece of shingle on the tar set aside for roofing and also take care to add enough asphalt all around the edges of the leaking area. This move is to make it firm and secure.

Step 4: Measure the total leak’s Distance

  • While you are still in the attic, endeavor to measure the total Distance or the full extent of the hole from both the ridge and the roof. In doing this, you are making it easier for yourself to trace the leak after the rains.
  • After the rains, you can now go back to your roof and measure the exact dimensions and then secure the base firmly by surrounding the leak with more roofing tar.

According to GAF - an authority figure in the roofing industry. Suggestions have been made about making use of a flashlight to inspect the beams of your attic from time to time, check for any soft spot that may indicate a leak, mark the area appropriately to find it quickly the next time. Do make sure you conduct periodic checks from time to time to prolong the life span on your roof.

When trying to find a roof leaking area, do note that items that penetrate the roof are the most common sources for leaks. So do look around plumbing and roof vents, chimneys, dormers, solar tube lightings, or any other similar item. The solutions offered are temporary at best, so please do endeavor to call on professional roofers to handle your permanent roof repairing as they have the best knowledge on how to do this.