How To Remove Plumbers Putty: Awesome Method Everyone Can Relate

Home Tips

Plumbers putty is one of the most valuable methods when it comes to preventing water leakage. But most still find it challenging to use this product, especially issues regarding removal. 

If you are one of those who don’t know how to remove plumbers putty, our post today might be precisely what you need. Stay tuned for valuable tips and tricks. 

Plumbers Putty: What Is It?

A plumbers putty is a dense, flexible mixture that everyone can shape with no effort. This compound is mostly from vegetable and mineral oils. Therefore, it is naturally pliable. Like a plumber’s joint compound, this product doesn’t get hardened or dried up much after use.

Also, plumbers putty doesn’t break into parts or shrivel. As stated above, it helps to seal rims or the area between your faucet and sink. However, putty doesn’t work with covering pipe threads. 

Another thing to keep in mind is that this compound doesn’t perform well under high water pressure. It only acts as a fence guarding and stopping water from seeping behind your plumbing appliance.

Read more: 7 Surprising Causes of Low Water Pressure in Your House

Plumber’s Dope Vs. Plumber’s Putty

Most people find it challenging to distinguish these two compounds. A plumbers dope also called a pipe dope, is a slang way to depict a composite that helps to connect pipes. It’s usually in a small container.

The consistency of plumbers dope is similar to mashed potatoes: pretty fine. When in use, the product remains a paste and doesn’t turn solid. Over time, the product still stays the same and never gets crusty or crispy.

Thanks to these features, plumbers dope works perfectly as a void filler of those pipe threads. There are two primary types of pipe dopes: one is for propane appliances, and the other is for plumbing appliances.

Both are excellent options to block leakage, but utilizing the wrong one can result in damages and outpouring.

Where can we use plumbers putty?

If you face plumbing issues, a plumber’s putty could be an excellent tool. 

This compound acts as a seal protecting your drainage system, faucets, sink, and other plumbing appliances for most parts. This is also the reason behind its second name of “sink drain putty.” If you’re witnessing leakage and know for sure where the original oozing area is, feel free to use plumbers putty to seal the place. 

Typically, when we install our plumbing fixtures, it’s a must to utilize putty. However, through time, it could get degraded and cause leakage. Additionally, if your appliances involve harsh solvents, the chances are that your putty can degrade even faster.

Differences between plumbers pipe and plumbers putty

While a plumbers putty acts as an ideal solution to sudden cracks and leakage, plumbers’ pipes cannot. 

On the other hand, as stated above, a plumbers putty cannot work effectively under pressurized water. Therefore, it cannot compare to plumbers pipe in this case.

You can check out these plumber bags for better comfort and utility. 

Which One Is Better: Silicone Or Plumbers Putty?

Sometimes, it’s tricky to pick between silicone and plumbers putty if you have no or little knowledge regarding this field. The answer is pretty simple: Each of them works best on specific occasions. 

When you have to handle sealing sink culverts, a plumbers putty is what you need. The reason is that putty only acts as a waterproof, temporary seal rather than making it a permanent bond. 

On the other hand, when you require a lifetime seal, you must use silicone. For example, you would need silicone to block utility leakages and outdoor plumbing appliances. Moreover, in cases where you’re dealing with a porous fixture, silicone is the best way to secure the leakage permanently.

Maybe you should know: How to Install a Farmhouse Sink in Existing Cabinets

How To Use A Plumbers Putty

For the most part, the texture of a plumbers putty is soft and highly adaptable when you use it fresh out of the box. After a few days, it would get dried and hardened a bit.

When you install your plumbing fixture or similar appliances, feel free to use plumber putty. It works best on plastic areas, porcelain sinks, and cast iron appliances. Stainless steel items are also suitable.

As mentioned above, putty doesn’t offer permanent sealing, so it should nick away effortlessly. In case it doesn’t fall apart, using a knife could quickly get rid of the hardened putty. 

Here is a full video on how to utilize a plumber putty in your house:

How To Remove Plumbers Putty

While plumbers putty offers an excellently robust watertight barrier, it does not adhere to the surface well. Thus, you can effortlessly get rid of hardened putty as claimed above. Another way to remove this compound is to put some pressure on your plumbing joint. It will get broken up in no time.

Use your finger to remove the left-over putty or utilize a scraping knife to get it off. However, as putty’s ingredients are mainly organic oils, a light coat of linseed oil might still stick on your fixture.

Most of the time, scraping helps. Yet, if the residue is a bit more stubborn, try rinsing it off with soapy water. 

Most cases are OK using those methods above. However, if you’ve tried your heart out washing the residue and it’s still there, it’s time to use a mineral spirit or a paint thinner. The plumbers putty should come off right away. 


That’s how to remove plumbers putty most effectively. Have you learned some tips for yourself? Try to use them the next time you face a plumber putty. We bet you’ll handle the situation like a pro.