What Size Sink For 30 inch Cabinet? (Explained By Experts)

Home Tips

Choosing sinks isn’t as simple as it might sound. Not only do you have to consider the material, the design, and the style, but you’ll also have to think about its compatibility with the existing countertop. Things even get trickier with a 30-inch cabinet as there are tons of misconceptions. 

Thus, many people are having headaches, finding the answer to the question, “What size sink for a 30-inch cabinet?” If you’re also one of them, today’s article will benefit you a lot. Keep on reading! 

What Size Sink For 30 Inch Cabinet?

First and foremost, not all 30-inch sinks fit a 30-inch cabinet.

If you see a 30-inch sink base, it only implies that its outer width is 30 inches. However, what is important is the inner width measurement, which finally comes down to how the manufacturers design the cabinets.

There are cabinets with 0.5-inch walls and others with 0.75-inch ones. As a result, the width of a cabinet’s interior (where the sink goes in) will range from 28.5 inches to 29 inches but not the initial 30-inch as many people thought. Thus, you need a sink with an inner (basin) width that fits this dimension rather than a 30-inch sink.

credit: http://mobileimages.lowes.com/

However, several companies label their sinks with the size of the flange in mind. Some kitchen sinks advertised as 30 inches, for example, may only have a basin that is 27 inches wide. On the other hand, a few others have their labels stay true to their actual basin dimension of 30 inches.

Due to this mislabelling, sometimes 30-inch sinks can fit snugly into a 30-inch cabinet. However, such cases are rare. If you want to ensure that the sink sits well in your cabinet, check the specs of each product.

Any sink featuring a basin measurement comparable to or equal to your internal cabinet size would be a tight squeeze. Because of the close numbers, it may require great expertise on your installer’s side to accommodate, but it will work and be structurally solid.

credit: cdn.decorpad.com

However, some consumers may prefer not to “take that risk” and instead pick a safer alternative. In this case, use the golden rule of subtracting 3 inches from the size of the base cabinet. As a result, the width of the sink you need is 27 inches.

Why Do You Need A Properly-Sized Sink?

Besides not fitting in the cabinet and costing extra money on another model, wrong-sized sinks also cause evident issues of back and neck aches, leak water, and many potential damages. However, one more important reason to have a proper-sized sink is that it benefits home sellers.

credit: cliqstudios.com

Nearly 40% of purchasers, according to recent real estate research, prefer houses that don’t call for any upgrading or modifications at all. Thus, when it comes to sinks, the wrong size, notably if it’s an integral model, might drive off future homebuyers, causing your property to sit on the marketplace for a long time.

In a different survey, purchasers rated kitchens as the most significant room in the house, which is a brilliant idea to fix, update, or check your sink condition before reselling. Indeed, having a decent kitchen increases the value of a home for purchasers.

How To Choose The Right Sink For 30-inch Cabinets

There are lots of factors regarding a sink for a 30-inch cabinet selection. Consider the below facets for the best selection.

Top-Mount Or Under-Mount Sink

You’ll discover that most sinks come with an integrated basin and a lip around the rim or perimeter. In the case of top-mount models, the lip will prevent the product from dropping right through and clattering to the floor.

credit: .pinimg.com

As a result, people usually call top-mount sinks drop-in sinks. For the same reason, they also get the moniker of overmount sinks and rimmed sinks.

See how to install a top-mount sink here:

Unlike its counterpart, which rests happily above the countertop, an under-mount sink clings on using its fingernails beneath the surface.

Because of this constraint, the installation of an under-mount sink is different. One way to set it up is by interposing the sink lip between the bottom of the tabletop and a supporting panel. 

Alternatively, attaching the sink to the countertop with a glue-like adhesive is also a preferable method. Yet, the most effortless approach is to fasten the sink beneath the bench.

credit: cheviotproducts.com

Everything adds to a more sleek appearance, with no noticeable lip and a relatively smooth tabletop surface over the entire area.

When it comes to a 30-inch cabinet, both options operate well. However, in our opinion, the under-mount ones best the other.  

First and foremost, if you want to catch up with modern kitchen styles and design, under-mount options are typically more appealing and stylish than classic drop-in models that have stood around for centuries, not to mention that they are easier to maintain than to their counterparts. Yet, most of them call for expert assembly.

credit: thespruce.com

On the other hand, top-mount sinks are difficult for users to clean quickly because of how people mount them. Also, these sinks call for regular caulking, which might not be time-saving.

Yet, in the end, it’s only a matter of personal preference.

The Material

Kitchen sinks composed of stainless steel are the best choice for the 30-inch-wide cabinets in your homes. Indeed, stainless steel products offer a variety of advantages in addition to being lightweight and economical.

First of all, finding a sturdy and stylish stainless steel sink that can retain its sleek appearance for a long time is a piece of cake. The material, by far, is one of the most durable ones in the industry!

credit: cdn.vox-cdn.com

Furthermore, unlike other materials utilized to manufacture kitchen sinks like cast iron or porcelain enamel, stainless steel doesn’t rust or corrode or stain at all. 

Thus, it’s super easy to maintain the sink’s look, which is the most popular reason why people opt for this material. If you’re using an all-in-one sink, this is highly accurate since there are no nooks or crannies for germs or other dirt to reside.


When it comes to a 30-inch cabinet, a more traditional style might work. For your information, the standard-styled models are usually 22 x 33 inches in width and 8 inches in depth with 2 basins with the exact dimensions. Thus, they are a safe bet for the mentioned cabinet size.

Alternatively, a 29-inch double bowl sink offers additional versatility in its application. With this sink, you’ll get dual 16×13-inch bowls that will accommodate your 30-inch base. 

This dual sink function might be beneficial when cooking as you could have one section for dirty dishes and another for food preparation.

Read More:

How to Install a Farmhouse Sink in Existing Cabinets?

What is the Best Caulk For Kitchen Sink in 2021? A Buyer’s Guide?


We understand it’s incredibly challenging to draw the final choice, especially when you’re not an expert. Yet, we hope today’s post has given you the answer to the question, “What size sink for a 30-inch cabinet?” and a clear vision of what to get. Good luck!